Boiler Installations & Replacements in Filton
Gas Safe registered engineers fitting new boilers in Filton's interwar semis, ex-council homes and newer flats. Clear written quote, tidy fitting and a full test before we leave.
- 10 years trading
- Gas Safe registered
- Local to Bristol
A new boiler for Filton's garden-village semis, ex-council homes and newer flats
Filton has grown in layers. There are the interwar semis built for the aircraft works, the solid 1950s and 60s estates, and the flats and townhouses added since. Each one throws up a different boiler job.
If you want boiler installations and replacements in Filton, the first question is usually what you already have. Many older homes still run a regular boiler with a hot water cylinder in the airing cupboard and a tank in the loft. Many newer ones have a combi on the kitchen wall. Swapping like for like is simple. Switching from one type to the other is a bigger job, and it's worth deciding before anyone quotes.
The usual reasons we're called out are a boiler that's past repair, a heat exchanger that has failed, or parts that are no longer made. Some people just want to stop paying to keep an old, inefficient boiler going. Whatever your reason, you'll get honest advice on repair versus replace, and a written quote you can read at the kitchen table.
- Like-for-like swaps and conversions between combi, system and regular boilers
- Old boilers removed and taken away
- Fitted by Gas Safe registered engineers
The parts of a Filton boiler job that decide how well it works
A boiler is only as good as the fitting around it. These are the details we get right on local houses.
A survey that fits the house
A 1930s semi with a cylinder cupboard needs a different plan from a modern flat with no loft. We check pipework, hot water demand and where the boiler can sit before recommending a size and type.
Flue and condensate planned properly
Modern condensing boilers need a compliant flue position and a condensate drain. On tight terraces and semis with side access, we plan the route so the pipe isn't left exposed to freezing on a cold January morning.
A system clean, because Bristol water is hard
We're in a hard water area, and old radiators and pipes hold sludge. We flush the system and fit a magnetic filter so the new boiler isn't working against old debris.
Controls that suit how you live
A modern programmer or smart thermostat can cut wasted heat. We'll set up the controls with you, rather than leaving a manual in the cupboard.
A quote that explains the price
Cost depends on boiler type and output, whether the boiler moves, flue length, pipework changes and controls. You'll see each part written down before you agree to anything.
A Filton boiler swap, from phone call to handover
For a straightforward swap, here's what to expect.
- 1
Tell us what you've got
Ring and describe the current boiler, the age of the house and what's gone wrong. We'll talk through whether a repair is still worth it and arrange a survey.
- 2
Survey and written quote
We look at the boiler position, flue route, pipework, radiators and hot water set-up. You then get a clear written quote with the options explained in plain English.
- 3
Fitting day
We protect floors, drain down, remove the old boiler and fit the new one with its flue, filter and controls. Heating and hot water are off for the shortest time we can manage.
- 4
Testing, registration and handover
We commission the boiler, check the flue and gas tightness, and balance the radiators. Then we show you the controls and register the installation. Boiler installs are notifiable under Building Regulations, and a Gas Safe installer handles that.
Every boiler we fit is installed by a Gas Safe registered engineer and the work is guaranteed for five years.
Filton boiler replacement: your questions answered
How long does a boiler replacement take?
A like-for-like swap is often done in a day. Moving the boiler, converting from a regular boiler to a combi, or a full system flush can add time. We'll tell you what to expect when we've seen the house.
Can you convert my old regular boiler and cylinder to a combi?
Often, yes, but it depends on your mains water pressure, how many bathrooms you have and how much hot water you use at once. A combi isn't always the best choice for a busy family home, and we'll say so if that's the case.
What affects the cost of a new boiler?
The main factors are the type and output of the boiler, whether it stays where it is, the flue route, pipework changes, a system flush, a filter and the controls. We give a written quote after the survey, so you can see where the money goes.
Is my boiler's flue a problem if I live in a flat or terrace?
It can be. A flue has to be a safe distance from windows, boundaries and openings. We check this at the survey and plan the route before quoting, so there are no surprises on the day.
Do I need to be home while the work is done?
Someone needs to be there at the start and the end, so we can agree access and go through the handover. In between, we'll work around your day as far as we can.
Do you cover Patchway, Stoke Gifford and the streets around Filton?
Call us with your postcode and we'll tell you whether we can get to you. Filton itself is one of our regular areas.
Need a new boiler in Filton? Call now
Ring 01225 123456, tell us about your boiler and we'll arrange a survey and a clear written quote.