Boiler Repairs & Servicing in Bath
Gas Safe registered engineers for fault finding, repairs and annual services in Bath's Georgian terraces, Victorian villas and hillside homes. Call 01225 123456 and talk to someone who knows what your boiler is up against.
- 10 years trading
- Gas Safe registered
- Local to Bristol
Old stone houses are hard on boilers
Much of Bath was built long before anyone thought about gas boilers. Boilers end up in basement kitchens, loft rooms, narrow cupboards and the corners of listed houses. They are often a long way from the nearest outside wall, and that shows up in the faults we see.
We get called out for no hot water, pressure that keeps dropping, radiators that stay cold at the bottom, banging or kettling noises, and boilers that lock out on the coldest mornings. Bath sits in a hard water area, so limescale is a regular culprit behind noisy, sluggish or inefficient boilers, especially on older systems that have never had a filter fitted.
Whether it's a repair or a service, we start by finding out what is actually wrong, and we tell you plainly what it will take to put it right. If you're in Widcombe, Larkhall, Oldfield Park, Combe Down or anywhere between, Plumbtap can usually offer a same-day callout.
- Fault finding on combi, system and regular boilers
- Annual servicing to the manufacturer's instructions
- Pressure loss, lockouts, ignition and pump faults
- Advice on whether a repair is still worth the money
The checks that matter in a Bath property
A good boiler visit is more than a wipe-down and a signature. These are the parts we pay closest attention to in this area.
Flues through thick stone walls
Bath stone walls are often a foot or more thick, which makes for long flue runs. We check the flue is sound, properly supported and terminating where it should. In a conservation area or listed building, any change to the flue position may need checking with the council first, so we'll tell you early.
Limescale and hard water wear
Scale builds up on heat exchangers and in pipework, and it's one of the main reasons boilers here get noisy and lose efficiency. We look for the signs and talk you through options such as a magnetic filter or a system flush where they would help.
Boilers in basements and tight cupboards
Poor access hides problems. We check ventilation, condensate pipe routes and the condition of the surrounding pipework, because a frozen or blocked condensate pipe is a common winter lockout in older Bath houses.
A diagnosis before any parts
We find the fault first and explain it in plain English. If a part is needed, you'll hear the cost before we fit it. If the boiler is past economical repair, we'll say so honestly rather than keep patching it.
From the hill to the heat exchanger: how a Bath visit runs
Bath's steep streets and permit parking mean a little planning helps. Here's how we keep the visit smooth.
- 1
A short call to get the facts
Tell us the boiler make, any fault code on the display, what it's doing and where it lives in the house. A basement, a loft or a third-floor cupboard changes what we bring.
- 2
Sorting access and parking
Many central streets are residents' parking only or very narrow. Tell us the best place to park, or whether a permit or visitor voucher is needed, and we'll arrive ready to work without a delay.
- 3
Diagnosis and a clear quote
We test the boiler, find the cause and explain what we've found. You'll get a price for any repair before we start, with no surprises added on the way out.
- 4
Repair or service, test and record
We carry out the work, then test that the boiler is running safely and properly. We leave the area clean and tell you what was done and what to watch for.
Gas work is done by Gas Safe registered engineers, and the work we carry out is guaranteed for five years.
Boiler repair and servicing questions from Bath customers
Can you repair a boiler in a listed building or conservation area?
Yes, repairs and servicing are routine. Changing a flue position or fitting something visible on the outside of the building is different, and may need consent from the council. If your job involves that, we'll flag it before any work begins.
My boiler is in a basement and keeps losing pressure. What should I do?
Switch off the boiler if you can see water leaking, and call us. Falling pressure usually points to a leak on the heating circuit or a faulty expansion vessel or pressure relief valve. Basement pipework can also be corroded after decades of damp. We'll trace it and tell you what it needs.
Does hard water really affect my boiler?
It can. Limescale reduces heat transfer and can cause kettling noises, slow hot water and extra wear on components. A service lets us check for signs of scale and advise on whether a filter or flush would help in your system.
What affects the cost of a boiler repair in Bath?
Mainly the fault itself, the availability of parts for your boiler model, and how easy the boiler is to get at. A boiler in a loft or cramped basement can take longer to work on than one in a ground floor kitchen. We'll give you a price before starting.
How often should my boiler be serviced?
Once a year is the usual advice, and many manufacturers require it to keep a warranty valid. Autumn is a good time, before the heating is in daily use. Check your boiler's paperwork for its specific requirements.
Do you cover areas around Bath too?
Yes. We regularly work around Bath and in nearby Keynsham, and we'll let you know on the phone whether your address is within reach for a same-day visit.
Boiler not behaving, or due its yearly service? Call now
Ring 01225 123456 and tell us what your boiler is doing. We'll talk it through and arrange a visit that suits you.